Filter
Top Products
Configuring the Voice Settings
DECT User
Cisco SPA232D Administration Guide 175
4
Handset 1
Field Description
Handset Name Name of the handset can be configured either from the
SPA232D web GUI or from the handset GUI. The name
can support only alphabets and numbers and the
maximum length is 10.
Default setting: Handset 1.
Similary for Handset 2, 3, 4, and 5, the default setting is
Handset 2, 3, 4, 5, respectively.
NOTE When multiple handset names are to be changed, they
are sent to CSS at a time with a format like this:
5#1: Name1#2: Name2#3: Name3#4: Name4#5: Name5
For example: If 5 handsets are requesting name
provisioning simultaneously, and their names are "Hank",
"White", "Pinkman", "Gus" and "Skyler" from handset1 to
handset5 respectively. Then the format as following:
5#1:Hank#2:White#3:Pinkman#4:Gus#5:Skyler
If the handset name is changed from handset
in
Settings>Handset Settings>Handset Name
, it will be sent
back to base and updated on the web page.
Outgoing DECT
Lines
A comma-separated list of the index numbers (1~10) for
the lines that are available from this handset for an
outgoing call. These lines will be listed on the phone
screen when the user displays the call options or holds
down the green call button.
Example: 1,2,8
In this example, a user can select DECT line 1, 2, or 8 for an
outbound call.
Default setting: 1
Note: You also can choose these lines from the DECT
Handset Outgoing Line Selection section of the Quick
Setup page.