Filter
Top Products
Administration Settings
Logging
Cisco SPA232D Administration Guide 188
5
Log Module
Use the Administration > Log > Log Module page to enable and configure
logging.
To open this page: Click Administration in the menu bar, and then click Log > Log
Module in the navigation tree.
NOTE
• As a best practice, Cisco recommends that you enable logging only when
needed, and disable logging when you finish the investigation. Logging
consumes resources and can impact system performance.
• If you want to enable email or syslog server logging, first specify the email
or syslog server settings on the Log Setting page.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Field Description
Status Click Enabled to enable logging, or click Disabled to
disable logging. The default setting is Disabled.
Log - Enable Check the box in the heading row to enable logging for
all services (kernel and system). Alternatively, check the
box for kernel or system to enable logging for that
service.
Service The type of service to include: kernel or system.