Filter
Top Products
Administration Settings
Logging
Cisco SPA232D Administration Guide 187
5
Bonjour
Use the Administration > Management > Bonjour page to enable or disable
Bonjour. Bonjour is a service discovery protocol that locates network devices such
as computers and servers on your LAN. It may be required by network
management systems that you use. When this feature is enabled, the ATA
periodically multicasts Bonjour service records to its entire local network to
advertise its existence.
To open this page: Click Administration in the menu bar, and then click
Management > Bonjour in the navigation tree.
Click Enabled to enable this feature, or click Disabled to disable it. The default
setting is Enabled. After making changes, click Submit to save your settings, or
click Cancel to redisplay the page with the saved settings.
Reset Button
To open this page: Click Administration in the menu bar, and then click
Management > Reset Button in the navigation tree.
Click Enabled to enable the reset button, or click Disabled to disable it. The
default setting is Enabled. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Logging
The ATA allows you to record incoming, outgoing, and DHCP lists for various
events that occur on your network.The Incoming Log displays a temporary list of
the source IP addresses and destination port numbers for the incoming Internet
traffic. The Outgoing Log displays a temporary list of the local IP addresses,
destination URLs/IP addresses, and service/port numbers for the outgoing
Internet traffic.
See these topics:
• Log Module
• Log Setting
• Log Viewer