Filter
Top Products
Configuring the Network
Advanced Settings
Cisco SPA232D Administration Guide 42
3
VLAN
Use the Network Setup > Advanced Settings > VLAN page to assign a VLAN ID
to your network. For example, your call control system may require a particular
voice VLAN ID.
To open this page: Click Network Setup in the menu bar, and then click
Advanced Settings > VLAN in the navigation tree. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
L2TP Passthrough Layer 2 Tunneling Protocol is the method used to enable
Point-to-Point sessions via the Internet on the Layer 2
level. Click Enabled to enable this feature, or click
Disabled to disable it. Default setting: Enabled
Field Description
Enable VLAN Click Enabled to enable a VLAN, or click Disabled to
disable this feature. Default setting: Disabled
VLAN ID The VLAN ID can be any numeral from 1 through 4094.
When VLAN is enabled, the default setting is 1.
Field Description