Filter
Top Products
Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 112
4
Unattn Transfer
Serv
Enable Unattended (Blind) Call Transfer Service.
Default setting: yes
MWI Serv Enable MWI Service. MWI is available only if a Voice Mail
Service is set-up in the deployment.
Default setting: yes
VMWI Serv Enable VMWI Service (FSK)
Default setting: yes
Speed Dial Serv Enable Speed Dial Service.
Default setting: yes
Secure Call Serv Secure Call Service. If this feature is enabled, a user can
make a secure call by entering an activation code (*18 by
default) before dialing the target number. Then audio
traffic in both directions is encrypted for the duration of
the call.
Default setting: yes
Star codes are set in Vertical Service Activation Codes.
To enable secure calling by default, without requiring a
star code, set the user’s Secure Call Setting to yes. See
User 1, page147.
Referral Serv Enable Referral Service. See the Referral Services Codes
parameter For more information.
Default setting: yes
Feature Dial Serv Enable Feature Dial Service. See the Feature Dial Services
Codes parameter For more information.
Default setting: yes
Service
Announcement
Serv
Enable Service Announcement Service.
Default setting: no
Reuse CID
Number As Name
Use the Caller ID number as the caller name.
Default settings: yes
Field Description