Filter
Top Products
5-17
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
Model Information Menu
Model Information Menu
The Model Information menu provides information that can assist with
troubleshooting the phone.
The Model Information menu shows the following information:
• Model Number—The model number of the phone.
• MAC Address—The MAC address of the phone.
• App Load ID—Identifier of the firmware running on the phone.
• Boot Load ID—Identifier of the factory-installed load running on the phone.
• Serial Number—Serial number of the phone.
Register Expires SIP registration interval, in
seconds, between each registration
renewal to the SIP proxy server.
The value can range from 1 to
86400.
1. Unlock configuration parameters.
2. Scroll to the Register Expires parameter,
press the Edit softkey, and then enter the
SIP registration interval.
3. Press the Accept softkey, and then press
the Save softkey.
Register with
Proxy
Indicates whether to enable SIP
registration. This parameter is
ignored if a SIP proxy server is not
specified.
1. Unlock configuration parameters.
2. Scroll to the Register with Proxy and
press the Ye s softkey to enable SIP
registration, or press the No softkey to
disable SIP registration.
3. Press the Save softkey.
NAT WAN IP
Address
External Network Address
Translation (NAT) IP address
where other SIP user agents can
communicate with the phone.
1. Unlock configuration parameters.
2. Scroll to the NAT WAN IP Address
parameter, press the Edit softkey, and
then enter the NAT IP address.
3. Press the Accept softkey, and then press
the Save softkey.
Table 5-2 SIP Configuration Menu Parameters (continued)
Parameter Description To Change