Filter
Top Products
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
SIP Configuration Menu
5-14
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
SIP Configuration Menu
The SIP Configuration menu lets you configure a variety of SIP signaling
parameters. Table 5-2 describes these parameters and explains how to change
them.
Note The Edit, Yes, or No softkeys for changing SIP configuration parameters appear
only if parameters are unlocked as described in the “Unlocking and Locking
Configuration Parameters” section on page 5-4. For information about the keys
you can use to edit parameters, see the “Editing Parameter Values” section on
page 5-5.
Profile Encrypt
Key
Specifies an encryption key used to
decrypt the profile that the phone
downloads from the TFTP server.
For more information about
encryption keys, see “Using
Encryption” section on page 6-15.
1. Unlock configuration parameters.
2. Scroll to the Profile Encryption Key
parameter, press the Edit softkey, and
then enter a new encryption key.
3. Press the Validate softkey, and then press
the Save softkey.
Erase
Configuration
Changes these settings to their
default values: Network
Configuration menu settings
(including password), SIP
Configuration menu settings, Call
Preferences menu settings, volume
settings, and contrast settings.
1. Unlock configuration parameters.
2. Scroll to the Erase Configuration
parameter, press the Ye s softkey, and then
press the Save softkey.
Table 5-1 Network Configuration Menu Parameters (continued)
Parameter Description To Change