Filter
Top Products
Chapter 8 Profile and Web Page Parameters and Defaults
Parameter Details
8-36
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
ConnectMode Detail
The ConnectMode parameter specifies the connection mode for the selected
call-signaling protocol, as described in Table 8-9.
Table 8-9 ConnectMode Parameter
Bit Description
0–15 Reserved. Must be set to 0.
16 Registration removal prior to re-registration.
• 0=Disable (default).
• 1=When the phone powers up, “Contact: *” is used to remove all registrations. On
subsequent registration cycles, “Contact: current_SIP_URL;expires=0” is used.
17–18 Reserved. Must be set to 0.
19 IP ringback and early media.
• 0=Do not send a ringback tone to the caller (default).
• 1=Send a ring back tone to the caller.
20 Include “action=proxy” in REGISTER request. Do not enable if bit 21 is enabled.
• 0=Disable (default).
• 1=Enable.
21 Include “action=redirect” in REGISTER request.
• 0=Disable (default).
• 1=Enable.