Filter
Top Products
Appendix A Additional End User Features on the Cisco IP Phone Models 7905G and 7912G
Softkeys
A-6
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Softkeys
Table A-2 describes the softkeys that can appear on the
Cisco IP Phone models 7905G and 7912G and that are not described in the User
Guide for the phone.
Call Forward
Number
Specifies a phone number to which all calls
to the phone are forwarded. If a number is
entered, the Call Forward All feature is
activated.
1. Scroll to the Call Forward Number
parameter, press the Edit softkey,
and then enter a phone number.
2. Press the Accept softkey, and then
press the Save softkey.
Forward to
VMail
Delay(s)
Specifies the number of seconds after which
an incoming ringing call will be forwarded
to the number specified by the Voice Mail
Number parameter.
1. Scroll to the Forward to VMail
Delay(s) parameter, press the Edit
softkey, and then enter a value.
2. Press the Accept softkey, and then
press the Save softkey.
Table A-1 Call Preference Menu Parameters (continued)
Parameter Description To Change
Ta bl e A - 2 So f kt e y s
Softkey Description
Back Displays the previous menu.
BlndXfr Allows the blind transfer of a call when Allow Blind
Transfer is enabled in the Call Preferences menu. In a
blind transfer, you transfer a caller to another number
without talking to the party who is to receive the call or
verifying that the new party is there.
To perform a blind transfer, follow these steps:
1. During a call, press the More soft key, then press
the BlndXfr soft key. The call goes on hold.
2. Dial the number to which to transfer the call. The
phone hangs up automatically.