Filter
Top Products
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
Network Configuration Menu
5-6
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Related Topic
• Unlocking and Locking Configuration Parameters, page 5-4
Network Configuration Menu
The Network Configuration menu lets you configure a variety of network
parameters. Table 5-1 describes these parameters and explains how to change
them.
Note The Edit, Yes, or No softkeys for changing network configuration parameters
appear only if parameters are unlocked as described in the “Unlocking and
Locking Configuration Parameters” section on page 5-4. For information about
the keys you can use to edit parameters, see the “Editing Parameter Values”
section on page 5-5.
Table 5-1 Network Configuration Menu Parameters
Parameter Description To Change
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone
obtains information such as its IP
address, its subnet mask, and the IP
addresses of the network gateway
and the DNS, NTP, and TFTP
servers.
Display only—cannot configure.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Display only—cannot configure.
Host Name Unique host name of the phone. Display only—cannot configure.