Filter
Top Products
8-35
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 8 Profile and Web Page Parameters and Defaults
Parameter Details
Table 8-8 Reorder Tone Parameter Example 2 Explanation
Component Setting Explanation
Sequential 0 Required setting for a tone with one frequency
NumOfFreqs 1 One frequency in the tone
TFreq_1 31164 First frequency is 400 Hz
TAmplitude_1 1620 First frequency volume is –19 dBm
TFreq_2 0 No second frequency
TAmplitude_2 0 No second frequency
TFreq_3 0 No third frequency
TAmplitude_3 0 No third frequency
NumOfOnOffPairs 2 Two on-off pairs in the cadence of the tone
OnTime_1 800 Sound in first on-off pair plays for 0.1 second
OffTime_1 7200 Sound in first on-off pair is followed by 0.9
second of silence
OnTime_2 2400 Sound in second on-off pair plays for 0.3
seconds
OffTime_2 5600 Sound in second on-off pair is followed by 0.7
second of silence
OnTime_3 0 No third on-off pair in the cadence
OffTime_3 0 No third on-off pair in the cadence
NumOfRepeats 5 First on-off pair of the cadence plays six times
(plays once and then repeats five times), then
the second on-off pair plays
TotalToneTime 0 Tone plays continuously (set of two on-off
pairs of the cadence repeat continuously) until
another call event stops the tone