Filter
Top Products
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
Network Configuration Menu
5-10
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Operational
VLAN Id
Auxiliary Virtual Local Area
Network (VLAN) configured on a
Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this parameter
indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor
the Administrative VLAN are
configured, this parameter is blank.
The phone obtains its Operational VLAN Id
via Cisco Discovery Protocol (CDP) from the
switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin
VLAN Id parameter.
Admin. VLAN Id Auxiliary VLAN in which the
phone is a member.
Overrides the value specified by
the Operation VLAN Id parameter.
1. Unlock configuration parameters.
2. Scroll to the Admin. VLAN Id parameter,
press the Edit softkey, and then enter a
new Admin VLAN value.
3. Press the Validate softkey, and then press
the Save softkey.
VLAN Enabled Indicates whether VLAN is
enabled for the phone.
1. Unlock configuration parameters.
2. Scroll to the VLAN Enabled parameter
and press the No softkey to disable
VLAN, or press the Yes softkey to enable
VLAN.
3. Press the Save softkey.
Table 5-1 Network Configuration Menu Parameters (continued)
Parameter Description To Change