Filter
Top Products
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
Network Configuration Menu
5-12
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
TFTP Enabled Enables or disables downloading
of a profile from a TFTP server. If
you set this parameter to Yes and
subsequently make changes using
the web interface, you must set this
parameter to No before saving
those changes; otherwise, the
changes will be overwritten by the
profile obtained from a TFTP
server.
If you set this parameter to Yes and
do not specify a TFTP server, the
phone will use the TFTP IP address
or URL obtained from the DHCP
server to contact the TFTP server.
If you set this parameter to Yes, set
the Alternate TFTP parameter to
Yes, and specify a value for the
TFTP Server parameter, the phone
will use the server that you specify.
1. Unlock configuration parameters.
2. Scroll to the TFTP Enabled parameter
and press the No softkey to disable TFTP,
or press the Yes softkey to enable TFTP.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone
obtains the IP address or URL of
the TFTP server from the DHCP
server (No) or uses the IP address
or URL specified by the TFTP
Server parameter (Yes).
If you set the Alternate TFTP
server to Yes, you must specify a
value for the TFTP Server
parameter.
1. Unlock configuration parameters.
2. Scroll to the Alternate TFTP parameter
and press the Yes softkey if the phone
should use an alternative TFTP server.
Press the No softkey otherwise.
3. Press the Save softkey.
Table 5-1 Network Configuration Menu Parameters (continued)
Parameter Description To Change