Filter
Top Products
Chapter 7 Configuring the Cisco IP Phone Models 7905G and 7912G Using Web Pages
Viewing Statistical and Operational Information
7-4
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Step 3 If you selected Network Parameters, SIP Parameters, Call Preferences, Tone
Parameters, or Audio Parameters, follow these steps:
a. If you have set up a password with the UIPassword parameter in the profile,
enter the password in the UIPassword field, and then click Apply. (If you
want to change the password, enter the new password in the two
ChangeUIPassword fields before clicking Apply.)
b. Make changes to parameters as needed and click Apply to save your changes.
Step 4 Close your web browser.
Viewing Statistical and Operational Information
The following sections describe the information that you can obtain from a
phone’s web page. You can use this information to remotely monitor the
operation of a phone and to assist with troubleshooting.
• Device Information, page 7-4
• Network Configuration, page 7-5
• Network Statistics, page 7-6
Device Information
Table 7-1 explains the fields displayed in the Device Information area of the
Cisco IP Phone web page.
Note To access the Device Information area directly from a web browser, enter
ip_address/DeviceInformation, where ip_address is the IP address of your
Cisco IP Phone.