Filter
Top Products
Chapter 8 Profile and Web Page Parameters and Defaults
Parameter Details
8-34
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
ReorderTone Parameter Example 2
Assume that you want a reorder tone in which:
• The only frequency is 400 Hz.
• The frequency plays six times, each time for 0.1 second followed by 0.9
second of silence.
• The frequency then plays once for 0.3 second followed by 0.7 second of
silence.
• The volume of the frequency is –19 dBm.
• The tone plays until another call event stops the tone.
For this reorder tone, make the following setting. See Table 8-8 for a detailed
explanation.
ReorderTone:0,1,31164,1620,0,0,0,0,2,800,7200,2400,5600,0,0,5,0
OffTime_2 0 No silence after the second sound (the third
sound plays immediately)
OnTime_3 2640 Sound in third on-off pair plays for 0.33
seconds
OffTime_3 8000 1 second of silence after the sound in the third
on-off pair (before the pattern repeats,
beginning with the first on-off pair)
NumOfRepeats 0 First on-off pair of the cadence plays once
(does not repeat), then the second on-off pair
plays
TotalToneTime 0 Tone plays continuously (set of three on-off
pairs of the cadence repeat continuously) until
another call event stops the tone
Table 8-7 Reorder Tone Parameter Example 1 Explanation (continued)
Component Setting Explanation