Filter
Top Products
8-11
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 8 Profile and Web Page Parameters and Defaults
SIP Parameters
SIPRegInterval SIP registration interval, in seconds, between each registration renewal to the
SIP proxy server. If set to 0, the phone uses the default value.
The value can range from 0 to 86400.
Value type: Integer.
Default value: 3600
MAXRedirect Maximum number of redirections the phone attempts to reach a callee.
The value can range from 0 to 10.
Value type: Integer.
Default value: 5
SIPRegOn Whether to enable SIP registration. This parameter is ignored if a SIP proxy
server is not specified. If set to 1, the phone periodically registers to the SIP
proxy server at an interval given by the SIPRegInterval parameter.
Valid values are 0 or 1.
Value type: Boolean.
Default value: 0
NATIP Network Address Translation (NAT) WAN IP address where other SIP user
agents can communicate with the phone.
Value type: IP address.
Default value: 0.0.0.0
SIPPort Port where the phone listens for incoming requests and sends outgoing
requests.
Valid values are 5060 to 65535.
Value type: Integer.
Default value: 5060
Table 8-2 SIP Parameters (continued)
Parameter Description