Filter
Top Products
Chapter 8 Profile and Web Page Parameters and Defaults
SIP Parameters
8-10
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Ta ble 8-2 S IP Paramet ers
Parameter Description
UID, PWD User ID and password for registration and authentication. Authentication can
be performed on the (UID, PWD) pair or on the (LoginID, PWD) pair
depending on the UseLoginID flag. However, the phone identifies itself to the
outside world with the UID only and can be reached only with the
corresponding UID but not the LoginID. If UID is set to “.” or to “0” (zero),
the phone is disabled (does not register with the proxy server).
Value type: Alphanumeric string.
Default value: UID=123, PWD=0
Proxy SIP proxy server.
Value type: Alphanumeric string.
Default value: 0
AltProxyTimeOut Timeout, in seconds, for switching from backup proxy server to primary proxy
server.
The value can range from 0 to 4294967295.
Value type: Integer.
Default value: 0
UseLoginID Specifies which value to use for authentication:
• 0=Use UID for authentication.
• 1=Use LoginID for authentication.
Value type: Boolean.
Default value: 0
LoginID Alternate user name used for authentication.
Value type: Alphanumeric string.
Default value: 0