Filter
Top Products
Appendix A Additional End User Features on the Cisco IP Phone Models 7905G and 7912G
Call Preferences Menu
A-4
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Allow Blind
Transfer
Specifies whether blind call transfers can be
made from the phone. If this parameter is
set to Yes, the BlndXfr softkey will appear
when appropriate, allowing blind transfers
of calls. If this parameter is set to No, this
softkey will never be available.
See the “Other Features” section on
page A-7 for more information about blind
transfer.
1. Scroll to the Allow Blind Transfer
parameter and press the Yes
softkey to enable this parameter, or
press the No softkey to disable it.
2. Press the Save softkey
Allow
Conference
Specifies whether conference calls can be
established from the phone. If this
parameter is set to Yes, the Confrn softkey
will appear when appropriate, allowing
conference calls to be established. If this
parameter is set to No, this softkey will
never be available.
1. Scroll to the Allow Conference
parameter and press the Yes
softkey to enable this parameter, or
press the No softkey to disable it.
2. Press the Save softkey
Time Format Specifies the format for the time that
appears on the phone’s LCD screen. This
format is specified by one or more of the
following characters:
h—designates the hour in 12-hour format
H—designates the hour in 24-hour format
i or I—designates minutes
a or A—for 12-hour format, include “p”
with times from noon until one minute
before midnight
: (colon)—displays a colon that blinks
every second
For example, when the current time is 1:30
P.M.,
• h:ia causes the time to appear as 1:30p.
• H:I causes the time to appear as 13:30.
1. Scroll to the Time Format
parameter, press the Edit softkey,
and then enter a time format.
2. Press the Accept softkey, and then
press the Save softkey.
Table A-1 Call Preference Menu Parameters (continued)
Parameter Description To Change