Filter
Top Products
Administrator’s Guide for the VSX Series
2 - 10
Positioning Set-top Systems
The VSX 5000, VSX 6000, VSX 6000A, VSX 7000, and VSX 7000s systems are
designed to be placed on top of a monitor. You can order a shelf that can be
mounted on a wall or placed on top of a flat-panel monitor.
If you received a network interface module with your system, you may find it
convenient to install it before positioning the system. Refer to the installation
sheet that you received with the network interface module.
To position the system:
1. The hardware kit you received with the system includes a pair of
self-adhesive feet. If the monitor’s chassis slopes back sharply, install the
feet on the bottom of the system to stabilize it.
2. Place the system in the desired location, with the rounded front portion
hanging over the front of the monitor or shelf. Leave enough space to
work, so that you can connect the cables easily.
3. Remove the packaging collar from around the VSX system camera.
If you need to place the system face-down to connect the cables, make sure that
the camera does not touch the work surface. The weight of the system can damage
the camera mount.
Feet