Filter
Top Products
Managing the System Remotely
5 - 11
Configuring for SNMP Management
To configure the VSX system for SNMP Management:
1. Access the SNMP configuration screen either in VSX Web or on the VSX
system. In VSX Web go to Admin Settings > Global Services > SNMP.
On the VSX system go to System > Admin Settings > Global Services >
SNMP.
2. Configure these settings:
Setting Description
Enable SNMP Allows administrators to manage the system remotely
using SNMP.
Community Specifies the SNMP management community in which you
want to enable this system. The default community is
public.
Note: Polycom does not support SNMP configuration and
administration on VSX systems, therefore only one
community string is used for both read and write.
Contact Name Specifies the name of the person responsible for remote
management of this system.
Location Name Specifies the location of the system.
System Description Specifies the type of video conferencing device.
Console IP
Address
Specifies the IP address of the computer you intend to use
as your network management station and to which SNMP
traps will be sent.