Filter
Top Products
Handset Using the MDW 9031/9031DCP Pocket Phone 3
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 Issue 3 October 1999 89
To deselect the line or button, press O.
For information about assigning features to buttons, see “Programming Features for PARTNER, MERLIN, and
MERLIN LEGEND Systems” in Chapter 6.
Preselecting a Line
You may sometimes want to select a line other than the line to which the communications system automatically
connects you. To preselect a line, you must first enable Line Preselection. See “Enabling or Disabling Line
Preselection” earlier in this chapter.
Once Line Preselection is enabled, use the following procedure:
1 If the handset is “asleep,” press " to wake it up and activate the display.
2 If the Selection rectangle in the handset display is not surrounding the row that
includes the line you want to use, press " repeatedly until the rectangle encloses
that row. (See “Column and Select Buttons” earlier in this chapter for more
information.)
3 Press the '’ button that corresponds to the line within the Selection rectangle
that you want to select.
The ON icon flashes in the display and the handset emits double beeps.
4 Press O.
The ON icon displays steadily, and you are connected to the line you chose.
Accessing Certain Voice Mail Systems
with a DEFINITY System
Note: This section only applies to the MDW 9031 Pocket Phone.
After dialing into some voice mail systems (for example, Octel 200/250, 300/350),
the MDW 9031 Pocket Phone may not provide touch tones in order to access the
voice mail system prompts. If you experience this problem after dialing into your
voice mail system, press the
/ button twice. After pressing the / button
twice, your Pocket Phone will generate touch tones and you will be able to navigate
within your voice mail system. When you end your call to your voice mail system, or
press any non-dialpad button on your Pocket Phone (that is, Conf, Trans, Hold,
Redial, Mute), your MDW 9031 will stop generating touch tones behind the voice
mail system. You will need to re-enter
/ whenever you dial into these voice mail
systems or after you have pressed a non-dialpad button.
Using a Headset
Lucent Technologies offers the Supra 9031 headset, which is specifically designed for use with your MDW
9031/9031DCP wireless phone or the Radium (over-the-ear) headset. A headset assists in call answering and
provides hands-free operation.
For ordering information, see “Ordering Replacement and Optional Parts” in Chapter 4.