Filter
Top Products
3 Using the MDW 9031/9031DCP Pocket Phone Handset
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-16676 Issue 3 October 1999
Attaching the Metal
Carrying Clips
To attach the metal carrying clip to the battery pack, do the following:
1 Remove the battery pack from the handset, as described in “Inserting and
Removing the Handset's Battery Pack” in Chapter 2.
2 Place the two metal tabs on the clip into the slots on the battery pack, with the
“hooks” toward the bottom of the battery pack.
3 Slide the clip toward the bottom of the battery pack to engage the hooks.
4 Reinsert the battery pack in the handset, as described in “Inserting and Removing
the Handset’s Battery Pack” in Chapter 2.
Attaching the Plastic
Clips
To attach the plastic clips to the battery pack, do the following:
1 Remove the battery pack from the handset, as described in “Inserting and
Removing the Handset's Battery Pack” in Chapter 2.
2 Hold the battery pack so that the back of the battery pack is facing you.
3 Hold the carrying clip so that it looks like the letter “ T.”
Standard Spare
Battery Pack
Extended Spare
Battery Pack