Filter
Top Products
Installing a Single Carrier Installing the MDW 9031/9031DCP Pocket Phone 2
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 Issue 3 October 1999 37
4 Remove the plastic cap covering each radio module’s card edge before inserting
the radio modules into the carrier.
5 Starting from the leftmost slot (#1), insert each radio module into the carrier by
hooking it onto the radio module mounting rod. Slowly swing the radio module’s
card edge into the card edge connector on the back of the carrier.
6 When the card edge is fully seated, a snap lock on the bottom of the radio module
will engage.