Filter
Top Products
Installing Multiple Carriers Installing the MDW 9031/9031DCP Pocket Phone 2
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 Issue 3 October 1999 47
3 At this stage of your installation, verify the LEDs displayed match the third of the
SYNC and CONTROL/EXP LED Codes label, depending on whether the carrier
is the control or an expansion carrier.
4 If the LEDs on your installation do not reflect this pattern, there is probably a
mistake in the cabling. Power down the carriers and check that you have correctly
followed Steps 6 through 8 in “Mounting and Cabling Multiple Carriers.” If you
are still having problems, see Chapter 5, “Troubleshooting.”
5 If your LEDs match the pattern in the illustration, you can feel confident that your
carriers are cabled correctly.
6 Go to “Installing a Single Radio Module in Each Carrier” (page 48).