Filter
Top Products
C Specifications
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166146 Issue 3 October 1999
Electrical
Specifications:
(Power)
Battery Pack Life:
Handset
Battery Charger (BC)
Radio Module (RM)
Carrier (CA) w/6 RMs
Power Supply (BC)
Power Supply (RM)
Power Supply (CA)
Standard Nickel Metal Hydride
Extended Nickel Metal Hydride
1.0 watt
15 watts
4.0 watts
24 watts
15 watts (10V 1.5 A)
6.0 watts (10V 600 mA)
30 watts (9V)
3 hours talk time/22 hours standby time
8 hours talk time/72 hours standby time
RF SYSTEM PARAMETERS:
Frequency Band: 902 – 928 MHz
Channel Spacing: 150 KHz
Total Channel
Capability:
50 (Channels Dynamically Allocated out of 173)
Duplex Method: Time Division Duplex (TDD) (Transmit and Receive on same frequency)
Transmitter
Output Power:
Dynamic Power Adjustment: 1 mW ERP Minimum to 160 mW ERP Maximum
Receiver
Sensitivity:
-103 dBm at Antenna Port
OTHER:
Electrical
Requirements:
• 105–130VAC, 50–60 Hz, 3-prong outlet separate ground, separately at 15 amps
• Outlet must not be controlled by an on/off switch
• Grounding to comply with Underwriters Laboratories (UL) 1459
Requirements For
Out-Of-Building
Extensions:
Installation of a telephone or other standard (tip/ring) device in another building requires
the following In-Range Out-of-Building (IROB) to protect the switch/control unit and
telephone device from surges:
• MDW 9031/9031DCP Pocket Phone: two Lucent Technologies 146D protectors
(ETR); two Lucent Technologies 146E protectors (ATL)
Wiring:
• MDW 9031/9031DCP Pocket Phone: Lucent Technologies SYSTIMAX
®
or at least
2-pair (4-wire) star (“home run” not “loop”) ETR
• Lucent Technologies SYSTIMAX or at least 4-pair (8-wire) star (“homerun” not
“loop”) ATL
• Bridging Adapter: Lucent Technologies 267F2 (ETR)
• Bridging Adapter: Lucent Technologies 267C (ATL)
• Range: 1,000 feet (305 m) for the Radio Module (26 AWG)
GENERAL–
Continued