Filter
Top Products
Installing a Single Carrier Installing the MDW 9031/9031DCP Pocket Phone 2
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 Issue 3 October 1999 39
10 Plug the carrier’s AC adapter cord into the left side of the carrier.
11 Insert the carrier’s power cord into the AC adapter, then plug the power cord into
a properly grounded, 3-prong wall outlet that is not controlled by an on/off
switch.
If appropriate, you can wall-mount the AC adapter using its attached wall-
mounting bracket.
!
CAUTION:
Never connect or disconnect telephone line cords, or insert or remove radio
modules, while the carrier is plugged into the wall outlet.
12 Go to “Single Carrier Installation Self-Test” (page 40).
1 2345