Filter
Top Products
2 Installing the MDW 9031/9031DCP Pocket Phone Handset
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-16660 Issue 3 October 1999
Handset
This section explains how to install the handset battery pack, change the communications system setting, and fill
out the handset label.
Inserting and Removing the Handset’s Battery Pack
To insert and remove the battery pack:
1 To insert the battery pack into the handset, insert the two small rectangular tabs
located along the bottom back edge of the handset into the two rectangular holes
along the bottom front edge of the battery pack.
2 Press the battery pack downward until it clicks into place.
The battery pack must be charged prior to using the handset. See “Battery
Charger” later in this chapter for instructions.
Rectangular tabs
Spring latch