Filter
Top Products
2 Installing the MDW 9031/9031DCP Pocket Phone Handset
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-16662 Issue 3 October 1999
4 Press and hold “M” (6) for three seconds to enter Button Mapping Mode.
The handset display shows one of the following:
5 Press " repeatedly to cycle through the settings until the display appropriate
for your communications system is shown.
6 Press O when the correct setting is displayed.
The top line of the display shows information appropriate to the communications
system you are using.
7 To verify your setting, repeat Steps 1–3. The top line of the display should appear
as follows, depending upon your communications system:
For a description of the button mapping between the MDW 9031/9031DCP Pocket
Phone and the wired telephones for your communications system, or to program
features on buttons, see the appropriate “Button Mapping” topics in Chapter 6.
MAP:P PARTNER Systems
MAP:D DEFINITY Systems, System 25, System 75, and
System 85
Note: The MDW 9031DCP should only be set
to MAP:D for DEFINITY.
MAP:M1 All MERLIN Systems (except MERLIN 410
and MERLIN 820), including MERLIN LEGEND
MAP:M2 MERLIN 410 and MERLIN 820
PARTNER Systems LCL:P
DEFINITY Systems, System 25, System 75, and
System 85
LCL:D
All MERLIN Systems (except MERLIN 410 and
MERLIN 820), including MERLIN LEGEND
LCL:M1
MERLIN 410 and MERLIN 820 LCL:M2