Lucent Technologies MDW 9031 Cordless Telephone User Manual


 
MDW 9031 Compatibility MDW 9031/9031DCP Pocket Phone Compatibility 6
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 Issue 3 October 1999 129
Setting the Line
Ringing Options for
MERLIN Systems
Use the following guidelines to ensure optimal voice quality when using MDW 9031
Pocket Phones with MERLIN, MERLIN Plus, and MERLIN II:
Note: For MERLIN LEGEND Systems that use pooled lines, set the Line
Ringing options as described in the above table, if more than six MDW
9031 Pocket Phone handsets have the same pooled line appearance. The
above Line Ringing options are not necessary for MERLIN LEGEND
Systems that use the TransTalk MDW 9031 Pocket Phones as PBX
extensions; these systems can support up to five carriers.
System 25, System 75,
System 85, and
DEFINITY Systems
This phone must be administered as a BIS-22D MERLIN set (Apparatus Code
7315H) for the following systems:
System 25
System 75—R1V1, R1V2, and R1V3
System 85—R2V1, R2V2, R2V3, and R2V4
DEFINITY G1 (R1V4)
DEFINITY G2—G2.1 and G2.2—(R2V5, R2V6)
DEFINITY G3 Version 1 (R1V5)
DEFINITY G3 Version 1.1 and Version 2
Native terminal administration is provided in DEFINITY G3 Version 3.
Note: The MDW 9031 display and mail capabilities will function fully only if
your system supports:
Analog/Hybrid display sets.
Hybrid pack connections with necessary tone generation for
AUDIX/VOICE MAIL interaction.
Telephone
Communications
System
TransTalk 9000 System with
Two Carriers (one control and
one expansion carrier)
TransTalk 9000 System with Three
Carriers (one control and two
expansion carriers)
MERLIN
MERLIN II
MERLIN Plus
1 Set Line Ringing for each
extension that has a radio
module in the control carrier to
Ring.
2 Set Line Ringing for each
extension that has a radio
module in the expansion carrier
to Delayed Ring.
1 Set Line Ringing for each extension
that has a radio module in the control
carrier to Ring.
2 Set Line Ringing for each extension
that has a radio module in the
expansion carrier #1 to Delayed
Ring.
3 Set Line Ringing for each extension
that has a radio module in the
expansion carrier #2 to No Ring.
(Install an external audible alert for
these extensions.)