Filter
Top Products
2 Installing the MDW 9031/9031DCP Pocket Phone Installing Multiple Carriers
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-16654 Issue 3 October 1999
Installing the Remaining Radio Modules
To install the remaining radio modules:
1 Power down the carriers.
2 Remove the plastic cap covering each radio module’s card edge before inserting
the radio modules into the carriers.
3 Beginning with the first empty slot and working from left to right, insert a radio
module into each slot of the control carrier. Hook each radio module onto a
mounting rod. Slowly swing the radio module’s card edge into the card edge
connector on the back of the carrier.
Note: Slot 6 of a Model 117A3 control carrier must always contain a radio
module to pass the synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6 to be filled.