Vertical Communications TeleVantage 7.5 IP Phone User Manual


 
CHAPTER 7. INSTALLING INTEL DIALOGIC BOARD DRIVERS 7-15
Select @DI0408LSA_REV2_ML5.pcd to support 12 VoIP calls and host-based
VoIP stack.
Note:
Be sure to select from the firmware files starting with @, the versions
supported by TeleVantage. The versions without the @ are raw files without
TeleVantage-specific features.
Click OK.
3. In the DCM main dialog box, all the boards that are detected on the system are
displayed.
Important:
After installing new boards and restarting the TeleVantage Server PC,
DCM may fail to automatically detect some boards. If a board is not detected, it does
not appear in the DCM main dialog box.
4. Compare the boards listed in DCM with the boards installed on your system. If any
boards are undetected, see the following sections in Appendix C, Troubleshooting ,
for information about how to resolve the problem:
DM3 board. If a DM3 board is not detected, see DCM fails to detect a DM3 board
on page C-3. (See page 4-7 for a list of DM3 boards supported by TeleVantage.)
CTbus boards. If a CTbus board is not detected, see Troubleshooting mixed
CTbus board systems on page C-8.
Go to the next section.