Filter
Top Products
D-4 INSTALLING INTEL TELEPHONY COMPONENTS
8. Click OK to save your change.
9. In the right pane, double-click
Dialogic SRAM Protocol Driver. Repeat steps 6-8 to
change the driver’s Startup Type to
Automatic.
10. In the right pane, double-click
dlgcmcd. Repeat steps 6-8 to change the driver’s
Startup Type to
Automatic.
11. Restart the remote TeleVantage Server, and start DCM. DCM auto-detects the Intel
Dialogic boards on the remote Server.
Note:
If no DM3 boards are detected on the remote Server, errors similar to the
following will be logged to the TeleVantage Event Log. These error messages are not
fatal and can be ignored.
The dlgcmcd service depends on the dlgcmpd service which failed to
start because of the following error: The system cannot find the device
specified.
The dlgcmpd service failed to start due to the following error: The
system cannot find the device specified.