CHAPTER 4. INTEL DIALOGIC TELEPHONY HARDWARE AND SOFTWARE REQUIREMENTS 4-7
Using the information in the Intel Dialogic Hardware Specification tables, add up the timeslots
used by each board to make sure you do not exceed the maximum number of timeslots
supported. For example, you cannot install 10 D/480SC-2T1 SCbus boards, and 5
MSI/80PCI-GBL CTbus boards, because the total number of timeslots required by this
configuration is 1160, which exceeds the system limit of 1024 timeslots.
About DM3 boards
TeleVantage supports the following Intel Dialogic DM3 boards, which have special
requirements and configuration needs as outlined in the rest of this manual.
DM/IPx integrated Internet telephony boards with T1 and E1 trunk and conferencing
resources
DISIx or HDSI/x analog station boards
DM/V160LP and DM/V160LPEU analog trunk boards
DM/Vx-A T1 and E1 trunk boards
DM/V2400A conference and voice resource bridge board
DI0408LSAR2 integrated analog trunk and station board with conferencing and Internet
telephony