Filter
Top Products
B-4 INSTALLING INTEL TELEPHONY COMPONENTS
The menu shown in the next figure appears.
Changing TeleVantage ISDN protocol parameters
When you have determined the protocols that your ISDN line requires to make and receive calls,
you can update TeleVantage with those protocols by using the TeleVantage Administrator.
Use the following procedure if you were able to determine the correct protocols when you used
the DMU or if you want to change a particular parameter.
1. In the TeleVantage Administrator Trunks view, right-click a trunk in the ISDN span
that you want to update and choose
Open Span.