Vertical Communications TeleVantage 7.5 IP Phone User Manual


 
APPENDIX B. CONFIGURING INTEL DIALOGIC BOARD ISDN PARAMETERS B-7
3. Run the following command:
TVDTrace <board number>
where
<board number>
is the Intel Dialogic device name of the board that you want to
trace. For example, to trace the first ISDN T1 board in the system described in the
previous example, run the following command:
TVDTrace dtiB1
4. To stop tracing, press Ctrl+C on the command window.
Viewing D-Channel Trace files
D-Channel Trace creates binary trace files in the same directory as TeleVantage Server logs. The
default location is:
C:\Program Files\TeleVantage Server\Logs
The files are named according to the following format:
dtrace_dtibn_xxx.dat
where n is the Intel Dialogic board number and xxx is a value between 000 and 999.
You use the Intel Dialogic PRITrace utility to create a text version of a binary trace file.
PRITrace is installed automatically in the
\Dialogic\bin directory on the TeleVantage Server.
To view D-Channel Trace files
1. Open a command prompt window, and then change to the
\TeleVantage Server\Logs
directory.
2. Run the following command:
PRITrace <binary trace file name>
For example:
PRITrace dtrace_dtib1_001.dat
PRITrace creates a text version of the trace file with the extension .res, for example:
PRITrace dtrace_dtib1_001.res
3. View the resulting .res file in a text editor.