Filter
Top Products
CHAPTER 4. USING THE FEATURES
In addition to, or instead of, the system Ioudspeaker
PagePac* paging systems can be used. The largest of
Your System Manager will inform you if your system
associated 1- or 2-digit selection code.
paging equipment, a variety of
these supports 39 paging zones.
includes this equipment and its
The allowable paging time is preset for the system. (The System Manager will provide this
information.) If the preset time interval expires while an announcement is being made, the
call is disconnected; intercept tone is heard.
Note: The attendant cannot extend calls to a loudspeaker paging device.
To Page for a caller:
1.
Press
[Start].
• Dial tone heard.
• Split lamp lights.
• Caller is separated from the connection.
2. Dial the page zone or PagePac paging system’s trunk access code.
• Dial tone heard.
3. Use the touch-tone dial or the selector console to dial the extension number where
the call is to be parked. Listen for call progress tone.
• Confirmation tone—the call is temporarily parked; go to Step 4.
Ž Steady tone
—enter the digits of the selected PagePac paging system zone;
go to Step 4.
• Busy tone—a call is already parked at the dialed extension number; go to
Step 6.
4. Speak into the handset to make the announcement.
Ž Announcement heard in desired paging zone; go to Step 5.
Ž Confirmation tone—call is automatically and permanently parked on parking
party.
5. Press [Release].
● Registered Trademark of Harris Corporation Dracon Division
4-32