Filter
Top Products
CHAPTER 4. USING THE FEATURES
6. After the conference is established, release it from the console (Step 7); or hold it at
the console (Step 8).
7. Press (Release).
• Console is no longer associated with the conference.
• Atnd lamp at call appearance where conference was set up goes dark.
• Display goes dark.
• Pos Avail lamp lights.
• Procedure complete.
8. Press (Hold)
• Hold lamp at call appearance where conference was set up lights.
• Atnd lamp and the display go dark.
• Pos Avail lamp lights.
• Conferees who are inside the system can recall the attendant for assistance.
• Procedure complete.
Attendant Control of Trunk Group Access
This feature allows attendants to control access to as many as six (12 if the console is
Enhanced and the system is Generic 1) trunk groups, loudspeaker paging zones, or code
calling zones per console.
Calls from system users to the trunk group under attendant
control redirect to an attendant console.
The Attendant Control of Trunk Group Access feature is normally activated when the trunk
group Warn lamp lights.
Your System Manager will tell you when and how to use this
feature.
When the call is redirected, the alphanumeric display identifies the following:
• Call appearance; for example, c=
• Calling party and trunk that the calling party tried to access
• Call purpose, tc.
4-4