Filter
Top Products
CHAPTER 3. OPERATING THE CONSOLE
5. If you are going the announce the call, wait for the called party to answer.
If the called party accepts the call, press (Release).
• Caller is connected to the called party.
• Split lamp goes dark.
• Procedure complete.
If the called party declines to talk to the caller, press (Split) after the called party
hangs up.
• Console is connected to the caller again.
• Split lamp goes dark.
Explain to the caller that the called party
is not available. Take a message, or ask
the caller to try again later; then press (Release).
• Procedure complete.
6. If the called party is busy or does not answer, press (Cancel).
• Outgoing call is canceled.
• Call progress tone stops.
•
Console is connected to the caller again.
• Split lamp goes dark.
Explain to the caller that the called party cannot be reached. Take a message, or
ask the caller to try again later; then press (Release).
• Procedure complete.
7. To set up a 3-way connection, press (Split) before or after the called party answers.
•
Console, caller, and called party are connected together.
• Split lamp goes dark.
To drop out of a 3-way connection, press (Release).
• Procedure complete.
3-13