Filter
Top Products
CHAPTER 4. USING THE FEATURES
To cancel a message you left for a system user:
1.
Press [Start].
• Dial tone heard.
.
• Atnd lamp at idle call appearance button lights.
• Pos Avail lamp goes dark.
2. Press [LWC Cancel].
• Second dial tone heard.
3. Dial extension number where message was left, and listen for tone.
Ž Confirmation tone—message canceled; go to Step 4.
• Reorder tone—message not canceled; go to Step 5.
4. Press [Release].
Ž Procedure complete.
5. Press [Cancel].
Ž Tone stops.
• Dial tone heard.
Ž To try again; return to Step 2.
Loudspeaker Paging Access
Systems)
This feature allows attendants to access
and a paging zone to activate all nine
(V1, V2, V3, and Generic 1
loudspeaker paging equipment. Nine paging zones
paging zones at the same time can be provided.
—
Attendants can page individuals by pressing the Page 1 through Page 9 or Page All buttons,
if provided, or by dialing an access code.
The allowable paging time is preset for the
system. (The System Manager will provide this information.) if the preset time interval
expires while an announcement is being made, the call is disconnected; intercept tone is
heard.
Note:
The attendant cannot extend calls to a loudspeaker paging device.
You can combine loudspeaker paging with the Call Park feature to connect a caller with an
inside party. The paged party can retrieve the call by dialing the Answer-Back code and the
parked-on extension.
4-29