Filter
Top Products
CHAPTER 4. USING THE FEATURES
8. Report
•
Controlled
to caller, and then press [Release].
Procedure complete.
Restrictions
This feature allows attendants to activate or deactivate the following restrictions for individual
voice terminals or groups of voice terminals (on a Class of Restriction basis):
Ž Outward-The voice terminal(s) cannot be used for placing calls to the public
network. Such call attempts receive intercept treatment.
• Total—The voice terminal(s) cannot be used for placing or receiving calls. Direct
Inward Dialing calls are routed to an attendant or a recorded announcement (as
specified for the system). All other calls receive intercept treatment.
• Station-to-Station (V3 and Generic 1 systems)—The voice terminal(s) cannot receive
or place station-to-station calls. Such call attempts receive intercept treatment.
• Termination (V3 and Generic 1 systems)—The voice terminal(s) cannot receive any
calls. Incoming calls are routed to the attendant, are redirected through the Call
Coverage feature, or receive intercept treatment.
These restrictions override restrictions assigned by the Class of Restriction (COR). Feature
access codes are assigned for individual and group restrictions. The attendant activates the
desired restriction by dialing the restriction activation code followed by a 1 for outward, 2 for
total, 3 for termination, or 4 for station-to station, and then dialing the extension number to
restrict one voice terminal or dialing the COR number to restrict a group of voice terminals.
Activation codes for voice terminals must be different from the COR number.
Feature deactivation codes are also assigned. Deactivation procedures are the same as the
procedures for activation.
All voice terminals with the same COR are affected by a group restriction. For example, if
the attendant dials the restriction activation code 2 (for total restriction) and 12 (a COR
number), all voice terminals with COR 12 would be restricted from placing or receiving calls.
To activate a restriction:
1.
Press
[Start].
Ž Dial tone heard.
Ž Atnd lamp at idle call appearance button lights.
• Pos Avail lamp goes dark.
4-15