Filter
Top Products
CHAPTER 10. REFERENCES
AT&T System 75—Installation and Test
555-200-104
Provides the information necessary to perform the tasks of installing and testing the
system’s common equipment. Includes a description of the necessary tools and equipment.
Information in this document applies to both System
AT&T System 75—System Maintenance
Provides the information necessary for monitoring,
and System 75 XE. It is intended to cover many of
the system.
75 and System 75 XE.
555-200-105
testing, and maintaining the System 75
the faults and troubles that can occur in
AT&T System 75—Upgrades and Additions
Provides procedures and information required for upgrading or making
operational System 75 or System 75 XE after the initial switch configuration.
in this manual applies to System 75 R1V1, RIV2, R1V3, XEV2, and XEV3.
AT&T System 75—Wiring
or
DEFINITY® Communications System Generic 1—Wiring
Provides the information necessary for installing inside wiring.
AT&T System 75 Electrical Protection, Grounding, and Exposure
Checklists
555-200-106
additions to an
The information
555-200-111
555-204-111
555-200-120
Provides coverage of the conditions that must be met before adequate electrical protection
can be assured for a System 75 installation.
It reflects the requirements of AT&T and the
National Electrical Code for protecting equipment against electrical disturbances or
exposures including lightning, power contact, power induction, and ground potential rise.
AT&T System 75—System Description
555-200-200
Provides a technical description of the system hardware, environmental and space
requirements, and parameters.
This document also provides a brief description of features
and services.
DEFINITY® Communications System Generic 1 and System 75—
Feature Description
Provides a technical description of system features and parameters.
555-200-201
10-2