Filter
Top Products
CHAPTER 4. USING, THE FEATURES
To extend a call using Code Calling Access:
1.
After answering an incoming call, tell the caller that you are going to break the
connection temporarily (split); then press [Start].
● Dial tone heard.
● Split lamp lights.
● Caller is separated from the connection.
2. Dial the desired Code Calling Access code.
● Dial tone heard.
3. Dial the extension number assigned to the person being paged, and listen for call
progress tone.
● Confirmation tone—call is parked on paged party’s extension number, and
paged party is paged (chime signals play at once and can play up to three
times while attendant remains connected to the call).
● Busy tone heard—go to Steps 7 and 8.
4. To drop out of the call before the paged and calling parties are connected, press
[Release]
(chime signals play once).
● Split lamp goes dark.
● Procedure is complete.
5. To establish a 3-way call, wait for the called party to answer; then press [Split]
(chime signals play up to three times).
● Split lamp goes dark.
● Three-way conversation established.
6. To hold the call on the console, press [Hold].
●
●
7. If busy
●
●
Hold lamp at call appearance used for call lights steadily.
Pos Avail lamp lights.
tone is heard, press [Cancel].
Busy tone stops.
You are reconnected to the caller.
4-14