Filter
Top Products
CHAPTER 2. DESCRIPTION
• Coverage Message Retrieval
IN PROGRESS
I
then
MESSAGES FOR BETTY R. SIMS
then
JOE JONES 10/16 11:40a 2 CALL 3124
This display means that Joe Jones called Betty R. Sims the morning of
October 16. The second message was stored at 11:40 a.m. Joe wants
Betty to call his extension number, 3124.
• Integrated Directory mode:
CARTER, ANN
3408
3
I
This display shows the name and extension number as administered in the
system. The 3 indicates that three buttons were pressed to search for and
display this particular directory listing.
Buttons and Lamps (Basic and Enhanced Consoles)
The eight buttons and associated status lamps on the Basic and Enhanced Consoles indicate
the display mode. On the Basic Attendant Console, these buttons and lamps are located on
the display module. On the Enhanced Attendant Console, these buttons and lamps are
located on the main console. When the status lamp associated with the Normal Mode button
is lighted, the alphanumeric display is in the Normal mode. When the Inspect Mode button is
pressed, the Inspect Mode button status lamp lights, the Normal Mode button status lamp
goes dark, and the alphanumeric display is in the Inspect mode. To return to the Normal
mode, the attendant presses the Normal Mode button again.
The following display functions are available on the buttons. The function of each button
may be changed by the System Manager.
• Normal Mode (Required Button)
Displays call-related information for an active incoming call and attendant-originated
call. A detailed description of this information is discussed in the Alphanumeric
Display section.