Filter
Top Products
CHAPTER 4. USING THE FEATURES
3. Use the touch-tone dial or the selector console to access
where the call is to be parked. Listen for call progress tone.
• Confirmation tone—the call is parked; go to Step 4.
the extension number
• Busy tone-a call is already parked at the dialed extension number; go to
Step 5.
4. Press (Release).
• Atnd and Split lamps and the display go dark.
• Pos Avail lamp lights.
• Call is now parked at the dialed extension number, and you can page the
other party.
5. To try another extension number, press (Cancel). Return to Step 1.
• Busy tone stops.
• You are reconnected to the caller.
Code Calling Access
This feature allows attendants to page a called party with coded chime signals in up to nine
areas (zones). In addition, one zone can be provided to activate all zones at the same time.
An access code is provided for each zone and for all zones.
When you dial the Code Calling Access code and the extension number assigned to the
paged party, the system translates the number to a chime code and plays the chimes over
loudspeakers.
The call is automatically parked (by the Call Park feature) on the paged
party’s extension number.
The paged party answers the call by dialing a Call Park Answer-
Back code and his or her own extension number.
You can combine call extending procedures and code calling to connect an incoming call to a
system user. You have the standard options of releasing the call, waiting for the paged party
to answer, or holding the call on the console.
4-13