Filter
Top Products
CHAPTER 4. USING THE FEATURES
To activate attendant control of trunk group access:
1.
Press (Cont Act).
• Cont Act lamp lights steadily.
2. Press the Trunk Group Select button of the trunk group to be controlled while
observing the Cont Act lamp and the Cont lamp for the specified Trunk Group Select
button.
• Cont Act lamp goes dark; Cont lamp for the specified Trunk Group Select
button lights—operation allowed.
• Cont Act lamp flutters, then goes dark; Cont lamp for the specified Trunk
Group Select button remains dark—operation denied; return to Step 1.
To deactivate attendant control of trunk group access:
1.
Press (Cont Deact).
• Cont Deact lamp lights steadily.
2. Press Trunk Group Select button of the trunk group for which control is to be
deactivated while observing the Cont Deact lamp and the Cont lamp for the specified
Trunk Group Select button.
• Cont Deact lamp goes dark; Cont lamp for the specified Trunk Group Select
button goes dark—operation allowed.
• Cont Deact lamp flutters, then goes dark; Cont lamp for the specified Trunk
Group Select button remains lighted—operation denied; return to Step 1.
Attendant Direct
This feature allows the
Trunk Group Selection
attendant to select a trunk group for an outgoing call, loudspeaker
paging zone, or code calling zone by pressing a Trunk Group Select button. The procedures
for activating this feature are incorporated into all the calling procedures that require trunk
access. Each attendant console has 12 Trunk Group Select buttons. (In Generic 1 only,
feature buttons may also be used as Trunk Group Select buttons. This allows up to 24
Trunk Group Select buttons on a console.) In a Generic 1 system, up to 12 feature buttons
may be used as additional Trunk Group Select buttons on each console, limit 24 per console.
4-5