Filter
Top Products
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual
7-6 Sanity Checks
Sanity Error and Warning List
Table 7-2 lists in alphabetical order all sanity errors and warnings generated by
Vmux-2100.
Table 7-2. Sanity Errors and Warnings
Display Type Description
BUNDLE IS NOT
CONNECTED
Warning A timeslot is assigned to a bundle which is not connected
CARD DOES NOT EXIST IN
SLOT
Warning A voice card configured in the database is missing from a slot
CARD EXISTS IN SLOT Warning A voice card installed in a Vmux-2100 slot is not configured in
the database (the Hub menu).
CARD TYPE MISMATCH Warning A mismatch between a voice card or main link card installed in
Vmux-2100 and its type configured in the database.
CCS TS NOT RELATED TO
THE SAME BUNDLE
Error At least two timeslots of the E1/T1 port with the CCS signaling
are assigned to different bundles. To avoid it, assign all
timeslots of the same E1/T1 port with the CCS signaling to the
same bundle.
CCS TS NOT RELATED TO
THE SAME SLOT
Error At least two timeslots of the E1/T1 port with the CCS signaling
are assigned to different destination slots. To avoid it, assign all
timeslots of the same E1/T1 port with the CCS signaling to the
same destination slot.
CODER PROBLEM Error Conflict in the DSP capacity and timeslot configuration. Since
each DSP handles six timeslots, every six consecutive timeslots
must be configured to use the same voice compression
method.
CONNECTIVITY VALUES
MUST BE THE SAME FOR ALL
GROUP BUNDLES
Error Connectivity values of all bundles which belong to the same
group (have the same source IP) must be the same.
DISCONNECT BUNDLE
BEFORE CHANGING CODER
RATE
Error Voice compression type was changed for a connected bundle.
A mismatch between a voice compression type of an active
local bundle and that of the destination bundle may cause
problems at a DSP. To avoid this, do the following:
1. Disconnect a bundle of the local Vmux-2100.
2. Disconnect destination bundle of the remote Vmux-2100.
3. Change the voice compression method for both bundles.
4. Reconnect the bundles.
DOUBLE ROUTE Error More than one timeslot is connected to the same destination
timeslot
E1/T1 NOT THE SAME FRAME
TYPE
Error E1/T1 ports of the same group are configured to the different
framing modes
EMPTY ADMINISTRATOR
LIST
Error The last administrator account is deleted from the user
database.
EXTERNAL NOT
CONNECTED
Warning A timeslot is assigned to an E1/T1 port which is not connected