Filter
Top Products
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual
4-16 Configuring the Vmux-2100 System
To configure the keep-alive suppression rate:
1. From the Signaling Configuration menu (see Figure 4-15), choose
SS7 Keep-Alive Suppression Rate.
The SS7 Keep-Alive Suppression Rate menu appears (see Figure 4-18).
SS7 Keep-Alive Suppression Rate (0%)
1. 0% - No Suppression / Not SS7
2. 10%
3. 20%
4. 30%
5. 40%
6. 50%
7. 60%
8. 70%
9. 80%
10. 90%
>
Please select item <1 to 10>
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-18. SS7 Keep-Alive Suppression Rate Menu
2. From the SS7 Keep-Alive Suppression Rate menu, type a number
corresponding to the desired value, and press <Enter>.
Assigning a Name to Vmux-2100
The Vmux-2100 management software allows you to assign a name to the unit to
distinguish it from the other devices installed in your system.
To assign a name:
3. From the Management menu (see Figure 4-6), choose Host Mux Name
4. Enter a name for the Vmux-2100, and press <Enter>.
Assigned name appears at the top of each terminal screen.
Setting Date and Time
You can set the time for the Vmux-2100 internal real-time clock.
To set date and time:
1. From the System menu (see Figure 4-5), choose Date & Time Update.
The Date & Time Update menu appears (see Figure 4-19).