Filter
Top Products
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual
4-32 Resetting Vmux-2100
4.8 Restoring Default Settings
You can restore default settings of the external E1/T1 ports. Restoring the E1/T1
defaults erases the E1/T1 port identification in the database, user’s configuration of
the group IP addresses, defined bundles and assigned timeslots. The system and
main link parameters are not affected.
To restore the Vmux-2100 to the defaults:
1. From the System menu (see Figure 4-5), choose Factory Defaults.
Vmux-2100 displays the following message:
Are you sure you want to initialize to default
configuration(Y/N)?
2. Type Y, and press <Enter>.
Vmux-2100 restores the settings of the external E1/T1 ports to their default
settings.
4.9 Resetting Vmux-2100
The Vmux-2100 management software allows you to re-initialize a single E1/T1
group of each voice module or a mainboard CPU.
To reset the Vmux-2100 components:
1. From the System menu, choose Reset Card.
The Reset Card menu appears (see Figure 4-40).
Reset Card
1. Reset Slot-1 Group-1
2. Reset Slot-1 Group-2
3. Reset Slot-2 Group-1
4. Reset Slot-2 Group-2
5. Reset Slot-3 Group-1
6. Reset Slot-3 Group-2
7. Reset Slot-4 Group-1
8. Reset Slot-4 Group-2
9. Reset MainBoard
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-40. Reset Card Menu
2. From the Reset Card menu, select a Vmux-2100 component to reset by typing
its number, and pressing <Enter>.
Vmux-2100 displays the following message:
Are you sure you want to reset the card ? Press Y/N
3. Type Y, and press <Enter>.
The card is re-initialized, its active software is decompressed and loaded
into the RAM.