Filter
Top Products
Vmux-2100 Installation and Operation Manual Chapter 5 Configuring Vmux-2100 for a Typical Application
AM Configuring Vmux-2100 for Operation with CCS Signaling 5-5
1 1
30 voice timeslots routed to
bundle 1, destination port 1
30 voice timeslots routed to
bundle 1, destination port 1
30 voice timeslots routed to
bundle 1, destination port 3
30 voice timeslots routed to
bundle 1, destination port 3
30 voice timeslots routed to
bundle 1, destination port 2
30 voice timeslots routed to
bundle 1, destination port 2
30 voice timeslots routed to
bundle 1, destination port 4
30 voice timeslots routed to
bundle 1, destination port 4
172.17.15.11 172.17.15.21
172.17.15.12 172.17.15.22
2 2
3 3
4 4
Bundle 1
Destination IP - 172.17.15.21
Bundle 1
Destination IP - 172.17.15.11
Bundle 1
Destination IP - 172.17.15.22
Local Vmux-2100 Remote Vmux-2100
Bundle 1
Destination IP - 172.17.15.12
Figure 5-2. External E1 Bundle and Timeslot Configuration
Transferring Database to the Remote Vmux-2100
To transfer the database to the remote Vmux-2100:
1. Upload the cnfg.dat file from the local Vmux-2100 to the management station
via he TFTP protocol.
2. Download the cnfg.dat file to the remote Vmux-2100 via he TFTP protocol.
3. Establish a Telnet connection.
4. Update the remote Vmux-2100 database by typing @.
The host IP and the main link values do not change when you download the new
configuration and update the database.
Completing Remote Vmux-2100 Configuration
The only difference between configurations of the local and remote units is the
source and destination IP addresses of their bundles.
To complete the remote Vmux-2100 configuration:
1. Display the Group 1 menu, and assign the 172.17.15.21 IP address to the
group 1 (Main Menu > Configuration > Card > Slot 1 > Group 1).
2. Display the Group 2 menu, and assign the 172.17.15.22 IP address to the
group 2 (Main Menu > Configuration > Card > Slot 1 > Group 2).
3. Display the Edit Bundle menu, and configure the group 1 bundle 1 destination
IP to 172.17.15. 11 (Main Menu > Configuration > Card > Slot 1 > Group
1 > Bundles Parameters > Bundle Configuration > Edit Bundle).
4. Display the Edit Bundle menu, and configure the group 2 bundle 1 destination
IP to 172.17.15. 12 (Main Menu > Configuration > Card > Slot 1 > Group
2 > Bundles Parameters > Bundle Configuration > Edit Bundle).
Now local and remote Vmux-2100 units are ready for operation.
Note