Filter
Top Products
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal
Configuring Main Link and Voice E1/T1 Ports 4-25
Slot 1
1. Group 1
2. Group 2
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-29. Slot Menu
2. From the Slot menu, select a group to configure.
The Group menu appears (see Figure 4-30).
Group 1
1. IP Address ... (0.0.0.0)
2. Bundles Parameters
3. External 1
4. External 2
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-30. Group Menu
3. From the Group menu, choose IP Address.
4. Enter the desired IP address, and press <Enter>.
Configuring Bundles
E1/T1 timeslots are grouped together into bundles. The payload of each E1/T1
group can be arranged into up to five bundles, with maximum of 60 timeslots per
bundle.
Before configuring bundles, you must add at least one bundle to a group.
To add a bundle:
1. From the Group menu, choose Bundles Parameters.
The Bundles Parameters menu appears (see Figure 4-31).
Bundles Parameters
1. Display Bundles
2. Bundle Configuration
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-31. Bundles Parameters Menu
2. From the Bundles Parameters menu, choose Bundle Configuration.
The Bundle Configuration menu appears (see Figure 4-32).